Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml
Alpine White 080
Cramer Ceramic, Enamel & Acrylic Repair Spray - 50ml Alpine White
For covering repairs & unsightly marks on Acrylic, Enamel, Ceramic, Fibreglass and Resin Stone surfaces.
For professional and cost-saving repairs when ease and perfect results are important.
Each Cramer Repair Spray can be used to cover repairs on:
- Acrylic (Baths)
- Enamel (Steel/Cast Baths)
- Ceramic (Sanitaryware)
- Fibreglass (Baths)
- Resin Stone (Shower Trays)
If you require a colour not shown have a look at the Cramer Colour Card under downloads to see available colours. Colours can be ordered on request.
DELIVERY RESTRICTIONS & SURCHARGE
We cannot ship this item to Highlands & Islands or International addresses.
The item contains an Aerosol which is prohibited by Royal Mail, most standard Couriers & Air Mail services.
We can only deliver to UK mainland addresses via specialist carrier, therefore a £3.50 additional delivery surcharge will be applied at checkout.
Easy to use to cover repairs & unsightly marks.
- Clean area thoroughly before you start
- Shake can vigorously for 3 mins
- Spray a sample area first ( min working temperature 20c /64f )
- Apply the spray thinly from a distance of 15 - 20 cm
Tip:
Even coverage is easier to achieve if you use a mask cut from paper, just cut to size of area being sprayed. For larger areas mask surrounding area.
Hold the mask about 1 - 2 cm in front of the damaged area and start spraying onto the mask, before directing the spray with light movements over the cut out area.
Wait one minute and apply the next coat. Repeat this process until the damaged area has been completely covered. To remove drips or runs you can use Acetone ( follow manufactures instructions )
The repaired area can be polished with either Email Star or Acryl star polish after four days.
This product had good coverage but is cream not white. It was also supplied with no instructions so I had no idea how long it would take to dry. It cannot stand any water on it while drying so we were left with lines on the porcelain where water dripped from the cistern.
Hello,thanks for letting us know about the missing instructions, we will look into rectifying this. There are however instructions on the website listings under "More Info". Regarding the finish, you might be able to improve the lines by polishing it with Email Star or Acryl Star after its been allowed to dry for 4 days
Hi can you use your bath after the two hours of spray
Thanks very much for the feedback glad you like them