Cramer Scratch & Chip Repair Kit - Blank
(Without finishing repair spray)
Cramer Blank Filler Kit (finishing sprays are available separately in a choice of colours)
For the repair of impact damage and flaking on washbasins, kitchen sinks, shower trays and bath tubs with enamel, ceramic (porcelain) and acrylic surfaces.
The kit can be applied for up to seven average size repairs:
2 components: filling compound with hardener, spatula, sand paper for repair of ceramic. For professional, money-saving repairs when ease and perfect results are important.
Each Cramer Blank Filler Kit can repair:
- Acrylic (Baths)
- Enamel (Steel/Cast Baths)
- Ceramic (Sanitaryware)
- Fibreglass (Baths)
- Resin Stone (Shower Trays)
Please look at our Cramer Bathroom & Kitchen Repair Spray to view available colours.
Acrylic
Please note: Tension cracks or holes cannot be repaired
Ceramic
Please note:Hairline cracks in ceramic surfaces cannot be repaired.
Good Afternoon I have a chip on the outside of my new acrylic/resin sink. Would this do the job? Thank you.
Yes this is the blank filler kit only, so would be used to fill in the chip. You would then need a repair spray in the appropriate colour to cover over the repair. If the chip is very small then you might get away with a touch up pen which contains a small amount of filler and top coat in one.
What colour is the repair filler when dry?
Hi Gordon, The repair filler is an off white colour when dry. I hope this helps Nathan
PERFECT,EASY TO FOLLOW INSTUCTIONS, FOR ENAMEL OR ACRYLIC METHOD FAST DRYING.